Job Title:
Plant Fitter
Reporting to:
Senior Management / Directors
Under the Health and Safety at Work etc. Act 1974 (HASWA 1974), NorPower, as your employer, has a duty to protect your health, safety and welfare, as well as that of others who may be affected by our business. NorPower must do whatever is reasonably practicable to achieve this.
As an employee, you also have a duty under HASWA 1974 to take care of your own health and safety and that of others who may be affected by your actions. You must work with NorPower and your co-workers to assist everyone in meeting their legal requirements.
Key Duties and Responsibilities
* Servicing, maintaining and repairing all company vehicles, plant and machinery to ensure safe working condition and conformance to relevant regulations
* Maintain servicing and maintenance plans and associated records
* Maintain reasonable stock of frequently used spare parts, oils, lubricants etc., and assist with record keeping and cost allocation
* Limited hand tools and specialised equipment will be made available and maintained (where appropriate) by the company. These must be cared for and used appropriately for their intended purpose. Additional personally owned hand tools will be required and must also be used, maintained, and stored correctly
* Comply with NorPower Health & Safety, Environment and Quality Policies, taking responsibility for your own health and safety, your colleagues’, and any visitors to the workplace
* Maintain a safe, clean and tidy work environment, including correct handling, use and storage of hazardous substances in accordance with COSHH regulations and assessments. No new substance should be used until a COSHH risk assessment has been carried out and appropriate controls are in place
* Ensure all waste arising from servicing, maintenance and repair is disposed of in accordance with current regulations and relevant records are obtained
* Carry out assigned tasks and duties in a safe manner, in accordance with instructions, and comply with safety rules/procedures, regulations, and codes of practice
* Carry out daily/task risk assessments and ensure full understanding of tasks before commencing work, with appropriate controls implemented
* Consult management if you become aware of any unsafe practice or condition, or if in any doubt about the safety of any situation
* Consult management if you become aware of the misuse or lack of basic maintenance checks being carried out on any item of plant or equipment, including road-going vehicles and HGVs
* Report all accidents and near misses
* PPE issued by the company must be used in accordance with the results of risk assessments, stored appropriately, and maintained in good condition. PPE must be checked before use and any defects reported
* All work tools, plant and equipment must be used correctly and safely in accordance with manufacturer instructions and training provided. Report any defects found
* Employees must not use any plant or equipment unless trained and authorised to do so
* Assist with other duties and tasks as appropriate for the needs of the business
Key Skills / Competencies
EssentialDesirableFormal qualification in mechanical engineeringFirst aid trainingMinimum 5 years' experience in a similar roleIOSH Managing Safely or equivalentKnowledge of applicable legal requirementsGood written and verbal communication skillsExcellent organisational skills; ability to prioritise workload and work under pressureGood level of physical fitnessCommercial awarenessAbility to work under own initiative and as part of a teamFull UK Driving LicenceCompetent in operation of plant (e.g., forklifts, telehandlers, MEWPs) and in safe loading/unloading of HGVs
#J-18808-Ljbffr