Overview The successful candidate will be responsible for the Functional Test, Quality Control and Build Standard to meet specification of high quality control panels and switchgear as part of a small team withithin the Hamilton factory and customer location worldwide Responsibilities Familiarising yourself with the specification to establish: a. Panel physical dimensions, colour, components used cable and crimp type etc are compliant with specification. b. The required operation of the system being controlled logical operation is correct and equipment ratings are adequate. Prepare item for testing i.e. Connect required test simulation equipment and power supplies as required. Test item using Electrical Drawings and FAT Document. Set-up any item which requires Parameter setting i.e. Inverters, UPS, etc. after consultation with Design Engineer Go on-line to any PLC, HMI or PC to download the required software for that project. Raise issues with design engineers which you consider require changes or clarification. Changes to design are only undertaken with consent of the responsible design engineer Fully document the Test Procedure and mark up all drawing errors found or changes made through testing process. Responsible for the Health and Safety within the test area: There are strict Safe Methods of Working within the test bay and workshop areas, including the use of PPE, during Live Working conditions, which MU...