Fulcrum Engineering & Technical are acting as a Employment Business on behalf of our Clients We are recruiting personnel at all levels and covering similar Welding Fabrication roles depending on applicants skill sets & experience. Pipe Fitter Fabs & Pipe Fitter Welders. Working on the fabrication of pipe spools and erecting & fitting work as required. Fabricator Welders will be more involved with fabrication work plus higher spec welding work with TIG. Sheet Metal Fabricator Welders & Welder Fabs working on the fabrication from engineering drawings & welding angle, box, tube to high spec finish. Welders TIG mainly working mainly on welding sheet metal 1.5 - 4 mm stainless or mild steel, ali, mild steel angle, box, tube with TIG or MIG. Also semi skilled applicants can apply if they can cover most of the work depending on their skill set Quals/Skills = Able to fabricate & weld with TIG mainly & some MIG, or weld with MIG and some TIG Ideally C & G or NVQ Welding Fabrication or Sheet Metalwork Ideally - IPAF Card & CSCS Card Hours = 0700 – 1600 or 1730 40 to 55 hours Mon to Fri pos work 0600 – 1700 or 0700 - 1800 as required Also 0600 or 0700 to 1330 Sat as required Term = Temp to Perm 13 weeks with good chance of perm role after 13 full weeks Perm = May be some direct perm roles if the applicant is working and has to give notice Pay Temp = £24 per hr basic 55 hrs £29 hr Sat Depending on Skills/Quals