Fulcrum Engineering & Technical are acting as a Employment Business on behalf of our Clients We are recruiting personnel at all levels and covering similar Welding Fabrication roles depending on applicants skill sets & experience. Fabricator Welders will be more involved with fabrication on sheet metal, plate, pipework on higher spec fabrication work such as tanks, vessels, conveyors. Welding work with TIG mainly and MIG on supports & frames. Must be able to work on their own from engineering drawings & fabricate from start to finish and weld to coded specs, Sheet Metal Welder Fabs & Fabricator Fitter Welders working on the fabrication from engineering drawings & welding angle, box, tube to high spec finish. Welders TIG mainly working mainly on welding sheet metal 1.5 - 4 mm stainless or mild steel, ali, mild steel angle, box ideally able to weld pipe & tube with TIG or MIG. Also semi skilled applicants can apply if they can cover most of the work depending on their skill set. Working mainly in the Fab Shop some workers may be asked to help out when really busy on installation work on factories/process plants. Quals/Skills = Able to fabricate & weld with TIG mainly & some MIG depending on skills levels, or weld with MIG and some TIG Ideally C & G or NVQ Welding Fabrication or Sheet Metalwork Ideally - Use Tube Bending Machine & Press Brake & other Work Shop Machinery & Tools Hours = 0730 to 1600 or 1730 40 to 48 or up to 55 hours Mon to Fri as required Also 0600 or 0700 to 1330 Sat as required Term = Temp Contract 6 to 13 weeks & Contract Temp to Perm 13 - 26 weeks with good chance of perm role after 13 or 26 full weeks Perm = May be some direct perm roles if the applicant is working and has to give notice Pay Perm from £17.50 to £18.50 basic per hr Pay Temp Contract = £22.50 per hr up to 60 hrs £27 per hr Sat Depending on Skills/Quals