BMSL are currently looking for MV Commissioning Engineers for work in the UK and Scandanavia please find a rough guide to the duties involved below.
Roles & Responsibilities
Able to lone working;
Work live and switch up to 1000V (up to 11/33KV preferable but not essential. If unable open to learning);
Enter a Switch Room and recognise if the Asset or Switch Room is safe to work in/on by proving dead through the safe isolation procedure;
Read and interoperate detailed RAMS;
Cross reference part numbers and identify reference/asset issues;
Perform manual handling activities to manoeuvre and final position switch panel sections into the desired room from delivery point;
Interoperate lifting plans from the delivery driver to set out safe restricted access zones;
Understand room setting out requirements & room layout plans;
Setting up the work site in terms of safety, access and where materials are kept;
Couple LV/MV switch panel sections panel together and fix to the floor;
Install and terminate control cabling;
Torque mechanical and electrical connections;
Critical Clean of LV & MV assets;
Receive Electrical Safety Document (permits);
Perform and record Dead Test results;
Perform Insulation resistance test;
Perform Flash test;
Perform Low Ohms resistance test;
Perform Secondary Injection test;
Perform Primary Injection test;
Configure protection device relay software;
Operate dead Air Circuit Breakers, MCCB's and Fused Isolators for maintenance regimes;
Detailed understanding of overall HV/MV/LV/UPS/ Generator systems integration and fault finding;
Detailed understanding of overall HV/MV/LV/UPS/ Generator control systems and fault finding;
Basic MV/HV system and switching procedure understanding;
Understand, interoperate & troubleshoot Dead test results;
Produce technical and progress reports.
Isolate and apply earth up to and including 33KV (preferable but not essential. If unable open to learning);
Issue electrical limitations off access, sanction to test and permit to work safety documents (preferable but not essential. If unable open to learning);
Prepare Switching Schedules (preferable but not essential. If unable open to learning);
Perform AC test, DC test, VLF test (preferable but not essential. If unable open to learning)