Electronic Engineer
Job Summary
Novocomms Limited ("NVC") –Birmingham, UK
NVC is looking for an Electronic Engineer (Ref.: EE who can turn complex system schematics into robust, production-ready mainboards. You will own the full design cycle for multi-layer, high-speed digital/RF PCB assemblies that integrate NPUs, baseband processors, high-speed SerDes, power-management and control MCUs. Beyond layout, you will select components, drive signal-integrity analysis, oversee board bring-up, write low-level test firmware and support EMC/compliance testing. Close collaboration with RF, DSP, FPGA, firmware, mechanical and test engineers is essential.
Key Responsibilities
Schematic & Layout
·Capture schematics for NPU, DDR, high-speed PHYs, baseband, RF front-ends and power rails.
·Route 6-20-layer PCBs to meet impedance, length-matching and EMI requirements; optimise placement for thermal and manufacturability (DFM).
Component & BoM Ownership
·Select cost-effective, long-life components; manage BoM, footprints and lifecycle data (silicon EOL, export-control).
Signal / Power Integrity
·Run SI/PI simulations (IBIS, S-parameters) for >10 Gbps SerDes, LVDS, PCIe, USB3 or Ethernet lanes.
·Validate PDN impedance, decoupling strategy and clock strategy.
Prototype Bring-up & Test
·Develop board-bring-up scripts, JTAG/SWD debug; write or modify MCU firmware for diagnostics.
·Execute functional, thermal, and stress tests; document results and corrective actions.
Compliance & Production Support
·Support CE/FCC and MIL-STD EMC, safety and environmental testing.
·Generate test procedures for manufacturing ATE; resolve factory yield issues if necessary.
Cross-Functional Collaboration
·Interface daily with RF, antenna, FPGA/SoC, embedded-SW and mechanical teams to ensure seamless system integration.
What We're Looking For
Essential Qualifications & Experience
·BEng/MSc in Electronic / Electrical Engineering or related discipline.
·3+ years hands-on PCB design (≥ 6-layer) for high-speed digital or RF products.
·Proficient with Altium Designer, Cadence Allegro or equivalent EDA; able to read/write IPC-2581, ODB++.
·Demonstrated layout of processors or SoCs with DDR3/4/LPDDR, high-speed SerDes (≥ 5 Gbps) and switch-mode power supplies.
·Working knowledge of MCU bring-up (C/C++) and basic FPGA concepts (clocking, pin-planning).
·Experience with oscilloscopes, VNAs, spectrum/network analysers and protocol decoders.
·Strong documentation, problem-solving and English communication skills.
Desirable
·Experience integrating NXP Layerscape, or similar NPUs/basebands.
·RF path layout (LNA, PA, mixers, filters) at >20 GHz; familiarity with phased-array control buses.
·EMI/EMC mitigation for CE/FCC, DO-160 or MIL-STD-461.
·Defence or satcom background; candidates with previous military service welcome.
·Familiarity with Python/LabVIEW for automated hardware test.
Package: £30k - £50k in salary depends on experience + benefits package (bonus and share options).
Location: Birmingham, UK
Closing Date: 30 Sept 2025.
To apply for this position please send your CV with a covering letter explaining how do you meet selection the criteria to: You will only hear from us if you have been shortlisted.
About Novocomms
NVC was established with the primary goal of introducing cutting-edge technology originating from British academia, specifically in the realm of antenna design. The dedicated team at NVC has successfully designed, developed, and patented a groundbreaking antenna technology. NVC's commitment to advancement goes beyond conceptualization, as the team is actively engaged in developing mmWave communication CPE, mobile satellite communication terminals, and other fully functional terminal products. Leveraging our advanced antenna technologies, NVC aims to contribute significantly to the evolution of communication devices. The market impact of this scalable technology is underscored by the numerous patent applications, both filed and in process, reflecting NVC's dedication to pioneering advancements in the field.
Job Types: Full-time, Permanent
Pay: £30,000.00-£50,000.00 per year
Benefits:
* Company pension
* On-site parking
Ability to commute/relocate:
* Birmingham B16: reliably commute or plan to relocate before starting work (required)
Experience:
* PCB: 3 years (required)
Work authorisation:
* United Kingdom (required)
Work Location: In person
Application deadline: 30/09/2025
Expected start date: 01/10/2025