The role is for an experienced CNC programmer / operator with experience of running a 3 axis, Fanuc controlled CNC machine and using Alphacam software or similar to set and run programmes.
Key skills and experience
* Able to work a rotating weekly Days/ Noon’s/ Nights shift pattern Monday to Friday.
* Worked within a production / factory environment programming, setting and operating a CNC machine which requires manual tasks adhering to Health and safety rules and procedures.
* Can follow standard process procedures and is able to document information in a written and numerical way.
* Forklift truck license and operation experience would be an advantage.
The Role
* To ensure the safe and efficient operation of all plant and equipment directly and indirectly associated with production.
* To ensure that all process and quality documents and procedures are followed at all times and that any issues are raised with a manager or relevant department as required.
* To reduce product loss and waste at every opportunity through good manufacturing practices.
* To make sure that shift handovers are conducted in a structured and informative way that ensures all areas of the plant are handed over in good and tidy order. Information re product in process and where we are on plan is discussed along with any other relevant information.
* Housekeeping on a clean as you go basis is maintained throughout the shift and in line with handover process.
* Any observed issues or improvements are communicated correctly. I.e. maintenance issues logged in the shift handover book or reported to a manager if convenient.
* Opening up and locking up of site as required dependant on shift.
* Working as part of a wider production team to ensure all operators are working in a safe and supported way.
* To assume responsibility for any in process change over procedures including but not limited to the following:
* Filling out paperwork and process information.
* QC checks.
* Machine set up /operation and product changeovers.
The role is primarily CNC Production Operating however, as part of a small production team there may be times when you may jump in to help on another process within the Production line which will add a little variety every now and then. For more information please forward your CV ideally with covering paragraph or two on why you feel this could be the ideal role for you