Safety, Health, Environment & Sustainability
* Production of Method Statements, Task Briefing and Risk Assessments to be approved by supervising engineers
* Contribution to production of all Permits to works, including briefing to the workforce
* Carries out Safety Inspections
* Hazard Identification and contribution to development of Safe System of Work
* Know the company procedures and statutory regulations relating to environmental and waste management issues. Carry out necessary monitoring under the guidance of others.
Dimensional/Spatial Control
* Provides dimensional control for a section of the works
* Undertakes as built surveys for a section of the works and presents results in format that can be included in project records if required
* Establishes and maintains secondary control on the project from primary control
* Checks dimension design data early, raising technical queries to eliminate delays from insufficient information
* Ensures that appropriate as built surveys are undertaken, correctly recorded and communicated
* Manages the survey equipment ensuring it is suitable for the works and in calibration so that there are no dimensional control errors due to survey equipment
Workmanship, Quality, Inspection & Testing
* Raises Non-Conformance Report (NCR) for all non-conformances and reports potential non-conformances
* Produces Inspection and Test Plans (ITP) that correctly interpret the specified quality requirements
* Implements the Inspection and Test Plan (ITP) and the Request for Witness and Approval (RWA) procedures
* Collates and files quality records for potential inclusion in quality assurance documentation
* Maintaining accurate records Daily Diary, photographs, records of site discussions
* Carries out quality control checks using internal check sheets where appropriate
* Applies the company and external technical information to help achieve the specified quality requirements
* Adopts and promotes a culture of "right first time"
* Works to Weekly Programme and marks up progress achieved weekly
* Production of accurate daily diary of resources, including labour, plant, materials, subcontractors and outputs
Information, Change Control & Records
* Files and maintains the engineer's drawings and specifications so that the current information is always presented to them
* Marks up drawings & specifications with any changes referencing the documentation that verifies the change
* Interprets and abstracts construction information from the drawings and specification and provides this to the supervisors and operatives in a clear and understandable way using sketches
Permanent Works Materials, Products, Plant & Systems
* Measures materials usage and provides quantity information for preparation of material call off / requisitions
* Carries out on site testing of materials, products, plant and systems as required by their role
* Setting out
* The provision of sketches detailing the setting out information installed
Construction Methods, Practices and Innovation
* Reads and understands method statements and makes sure that site operations follow these methods accurately reporting any variances to supervisors and his supervising engineer
* Produces sketches and drawings to clarify methods and construction sequences
Temporary Works/Systems & Cranes
* Understand and have a good command of temporary works and permits to load
* Takes on the role of temporary works inspector for standard temporary works they are involved with
* Makes sure that temporary works on their section are identified and the temporary works procedure is applied to them
Engineering Knowledge - Capture, Sharing & Using
* Interrogate design information and determine if there are sufficient details to construct the works. Raise relevant documentation (e.g. TIEs, TQs, CVIs, etc.) with assistance from supervising engineers / managers, to resolve discrepancies and anomalies detected.
* Effective communication of technical information to the workforce and liaison with functions/support services within the project team in a timely & accurate manner.
* Provide feedback to supervising engineers / managers on the effectiveness of materials, specialist contractors, plant and designers being used on site.
* Preparation of basic calculations/drawings/sketches
Qualifications
* Proven experience of working with concrete structures and civil engineering/building construction.
* Prior experience in Civil Engineering
* Prior experience in Architectural and Landscaping packages
#J-18808-Ljbffr